Airscape 1.0 WHF

 

For homes up to 1500 sq. ft. the AirScape 1.0 shares many of the features of the larger 1.7. Also two-speed, it delivers 1000 CFM to cool your space down fast. At low speed, it delivers 600 CFM of whisper-quiet flow so you can sleep in cool, fresh, quiet comfort while your house is cooled all through the night — so the next day your house will stay cool longer. Download the PDF printable brochure.

Key features

High Power, Low Noise with Two-speed Operation

While other fans in this class have just one speed, the AirScape 1.0 gives you two, so you have the flexibility to choose quieter operation or maximum airflow. On low, you get 600 CFM at a sound level of 2 Sones (a little more than a modern fridge). On high, you get 1000 CFM at just 3 Sones.

Outstanding Energy Efficiency

Even on high speed, the AirScape 1.0 uses just 70 watts of power — about a single light bulb worth, and a small fraction of the energy used by an A/C compressor. If you are comparison shopping, you’ll see that the 1.0 uses significantly less power than competitive whole house fans in terms of CFM/Watt. The AirScape 1.0 qualifies for rebates in a growing number of states and municipalities.

Automatic insulating door

A key drawback with traditional whole house fans was air leakage between the attic and living spaces. This could result in dirty attic air entering your living space, and, in cold climates, warm, and moist indoor air entering the attic and causing water damage through condensation. Properly installed, the AirScape 1.0 takes care of this problem with automatic, insulated doors that seal tight when the fan is not in use. So attic air never leaks into your living space, and warm air never condenses in your attic. And you can just relax and not think about it.

Premium Cube Core grill

The AirScape 1.0 comes with a premium high-flow grill that minimizes air movement noise through the grill. These high-performance grills look great too, so your system looks as unobtrusive as it sounds.

Heavy-duty construction

AirScape fans are robustly engineered for many years of dependable service. They are built in North America using all-metal construction, high-quality precision fan units, and heavy-duty industrial door actuators.

Maintenance-free operation

The AirScape 1.0 uses two precision computer-room fan units, which are sealed and never require lubrication. The only other moving part is the heavy-duty door actuator which is also maintenance-free. All mechanical parts are accessible and can be serviced or replaced without removing the entire unit.

3-year Warranty backed by professional support

Not only are the units guaranteed for 3 years, but they’re backed by our professional technical support. If you have a problem with your unit — or just a question — you’ll get prompt, knowledgeable responses from real engineers. Guaranteed.

Wireless remote option
Makes installation even easier with no wiring to run to the switch. Nice to have for convenient operation too!

AirScape 1.0 Specifications

Airflow	1000/600 CFM (high spd/low spd)
Fans	Two 10-inch precision fans
Energy use	70W (max)
Efficiency	14.3 CFM/Watt (max)
Acoustical	3/2 Sones (high spd/low spd)
Attic seal	Actuated, insulated damper door / foam gasket
Insulation	3" PolyISO R-22 Concerned about R-Values? read more
Control	Dual SPST Decora switch; optional wireless remote
Grille	High-flow, aluminum cube-core (white)
Installation	Drops in between 16” or 24” O/C joists
Rough opening	14.5” x 22.5”
Req. attic venting	2 sq. ft. net-free
Grille size (outer)	16” x 24”
Unit size	17.5” x 27.5” x 8” (L x W x H)
Unit weight	26 lbs
Electrical	120 VAC, 60 Hz
Warranty	3 years

•